Quinoxaline derivatives as attractive electron-transporting materials

• Zeeshan Abid,
• Liaqat Ali,
• Sughra Gulzar,
• Faiza Wahad,
• Raja Shahid Ashraf and
• Christian B. Nielsen

Beilstein J. Org. Chem. 2023, 19, 1694–1712, doi:10.3762/bjoc.19.124

• phenyl-C61-butyric acid methyl ester (PCBM) acceptor when used in bulk heterojunction polymer solar cell devices with poly(3-hexylthiophene) (P3HT) as the donor material. This improvement was attributed to the anchoring effect of the bulkier groups present in TQT-C60, which hindered the movement and

A series of perylene diimide cathode interlayer materials for green solvent processing in conventional organic photovoltaics

• Kathryn M. Wolfe,
• Shahidul Alam,
• Eva German,
• Fahad N. Alduayji,
• Maryam Alqurashi,
• Frédéric Laquai and
• Gregory C. Welch

Beilstein J. Org. Chem. 2023, 19, 1620–1629, doi:10.3762/bjoc.19.119

• characteristics (Figure 6c), with a rectification ratio that was higher than three orders of magnitude when comparing the current density under reverse bias and forward bias and a blocking behavior that was reasonable when the current was flowing in the opposite direction. The solar cell devices exhibit good PCEs

Enabling artificial photosynthesis systems with molecular recycling: A review of photo- and electrochemical methods for regenerating organic sacrificial electron donors

• Grace A. Lowe

Beilstein J. Org. Chem. 2023, 19, 1198–1215, doi:10.3762/bjoc.19.88

Strategies in the synthesis of dibenzo[b,f]heteropines

• David I. H. Maier,
• Barend C. B. Bezuidenhoudt and
• Charlene Marais

Beilstein J. Org. Chem. 2023, 19, 700–718, doi:10.3762/bjoc.19.51

• commercial antidepressants, anxiolytics and anticonvulsants, but also in reengineering for other applications. More recently, the potential of the dibenzo[b,f]azepine moiety in organic light emitting diodes and dye-sensitized solar cell dyes has been recognised, while catalysts and molecular organic

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• dye loading of the corresponding solar cell. Recently, Chauhan and co-workers [52] demonstrated a click-chemistry-inspired synthesis of porphyrin-meso-triazole-ruthenium(II) conjugates, as shown in Scheme 22. First, the porphyrin conjugates 111a,b (inverse tri-py) and 115a,b (regular tri-py) were

Molecular and macromolecular electrochemistry: synthesis, mechanism, and redox properties

• Shinsuke Inagi and
• Mahito Atobe

Beilstein J. Org. Chem. 2022, 18, 1505–1506, doi:10.3762/bjoc.18.158

• of organic electrochemistry for energy material applications. Organic semiconductor design for electron or hole transport is important for transistor and solar cell applications, and redox-active (but stable) organic and polymeric materials are promising for secondary batteries and redox flow

Scope of tetrazolo[1,5-a]quinoxalines in CuAAC reactions for the synthesis of triazoloquinoxalines, imidazoloquinoxalines, and rhenium complexes thereof

• Laura Holzhauer,
• Chloé Liagre,
• Olaf Fuhr,
• Nicole Jung and
• Stefan Bräse

Beilstein J. Org. Chem. 2022, 18, 1088–1099, doi:10.3762/bjoc.18.111

• possess antibacterial [2], antifungal [3], and antiviral properties [4] and form the core structure of commercially available drugs like brimonidine, varenicline, and quinacillin [5]. Quinoxalines can also be used in organic solar cell polymers [1][6] and have been described as donor moieties in many TADF

Synthesis and investigation on optical and electrochemical properties of 2,4-diaryl-9-chloro-5,6,7,8-tetrahydroacridines

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 2450–2461, doi:10.3762/bjoc.17.162

• organic molecules are finding use in numerous areas ranging from organic electronics [1][2][3][4][5], ions sensing [6][7], and solar cell development [8][9][10]. Within this background, acridines represent an interesting class of heteroaromatic π-conjugated compounds [11][12][13][14] which show great

Chemical syntheses and salient features of azulene-containing homo- and copolymers

• Vijayendra S. Shetti

Beilstein J. Org. Chem. 2021, 17, 2164–2185, doi:10.3762/bjoc.17.139

• for 81 and 0.24 cm2 V−1 s−1 for 83. The polymer 81 with an electron mobility of 0.42 cm2 V−1 s−1 represents one of the best unipolar n-type polymers for OFET applications. These polymers were also tested as electron acceptors for all-polymer solar cell (PSC) devices, and 81 in particular, showed a

• azulene density (75 mol % azulene) was found to be an effective cathode modification layer in a bulk-heterojunction solar cell with a power conversion efficiency of 7.9%. Conclusion This review has described the chemical syntheses and key features of azulene-containing polymers reported in the last three

• reported azulene-containing homo- and copolymers have proven to be efficient functional materials for organic field-effect transistor (OFET), all-polymer solar cell (PSC) applications, and they can also exhibit NIR absorption and electrochromism, and electrical conductivity. However, the reports on

Recent developments in photoredox-catalyzed remote ortho and para C–H bond functionalizations

• Rafia Siddiqui and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 248–280, doi:10.3762/bjoc.16.26

• neutrality; (iii) the use of household bulbs or LEDs as light sources under operationally simple reaction conditions; (iv) the high redox potential of photocatalysts that can manipulate the oxidation states of transition metal catalysts [54][55]. They have also found applications in novel solar cell

Functional panchromatic BODIPY dyes with near-infrared absorption: design, synthesis, characterization and use in dye-sensitized solar cells

• Quentin Huaulmé,
• Cyril Aumaitre,
• Outi Vilhelmiina Kontkanen,
• David Beljonne,
• Alexandra Sutter,
• Gilles Ulrich,
• Renaud Demadrille and
• Nicolas Leclerc

Beilstein J. Org. Chem. 2019, 15, 1758–1768, doi:10.3762/bjoc.15.169

• arise from their deep LUMO energy level. In terms of energy, the latter lies close to the conduction band of the electron-transporting oxide, limiting therefore the driving force of electronic injection, and hence the overall efficiency of the resulting solar cell. Results and Discussion 1. Design and

• solution located at 771 nm and 768 nm, respectively, with an absorption edge close to 900 nm. The absorption in the NIR region is a peculiar property that is of course a considerable advantage for solar cell applications. With the aim of investigating the behavior of those dyes once adsorbed on mesoporous

Fabrication of supramolecular cyclodextrin–fullerene nonwovens by electrospinning

• Hiroaki Yoshida,
• Ken Kikuta and
• Toshiyuki Kida

Beilstein J. Org. Chem. 2019, 15, 89–95, doi:10.3762/bjoc.15.10

• abilities for free radical scavengers and solar cell applications [18][19][20]. A serious issue for practical applications of fullerenes is the poor solubility in most solvents. Various methods to improve the solubility have been demonstrated by coating the surface with surfactants or host molecules and

Synthesis and application of trifluoroethoxy-substituted phthalocyanines and subphthalocyanines

• Satoru Mori and
• Norio Shibata

Beilstein J. Org. Chem. 2017, 13, 2273–2296, doi:10.3762/bjoc.13.224

• systems [69] such as solar cell materials as well as photocatalysts for organic reactions. A phthalocyanine dimer in which TFEO-Pcs are directly linked by C–C bonds has been reported (Scheme 4) [70][71]. This homodimer was synthesized by a palladium-catalyzed homo-coupling reaction of two A3B type

• . Therefore, the structural development of acceptor molecules is restricted. TFEO-Pcs could be developed as a new acceptor-type molecule. In fact, solar cells that utilize the ability of TFEO-Pc to accept energy have been developed. A planar heterojunction organic thin-film solar cell was prepared by using

• performance of solar cells has been investigated. The open circuit voltage (VOC), short circuit current density (JSC) and fill factor (FF) of heterojunction solar cells using various TFEO-Pcs were estimated and their conversion efficiency (Eff) was compared (Table 3). The solar cell that used phthalocyanine

Molecular-level architectural design using benzothiadiazole-based polymers for photovoltaic applications

• Vinila N. Viswanathan,
• Arun D. Rao,
• Upendra K. Pandey,
• Arul Varman Kesavan and
• Praveen C. Ramamurthy

Beilstein J. Org. Chem. 2017, 13, 863–873, doi:10.3762/bjoc.13.87

• indication of an efficient charge transfer between the donor and acceptor when excited at the wavelength of the absorption maximum of the donor. An efficient charge transfer between donor and acceptor is essential for good solar cell devices. The PL spectra of the polymers, consisting of PC70BM with various

• OPVs based on bulk heterojunction (BHJ) solar cells of polymers P1, P2 and P3 and tested them with PC70BM as an acceptor. The device architecture of the BHJ solar cell was ITO/PEDOT:PSS (40 nm)/polymer:PC70BM (120 nm)/Ca (15 nm)/Al (100 nm). Figure 6 shows the favorable energy alignments for both

Effects of solvent additive on “s-shaped” curves in solution-processed small molecule solar cells

• John A. Love,
• Shu-Hua Chou,
• Ye Huang,
• Guilllermo C. Bazan and
• Thuc-Quyen Nguyen

Beilstein J. Org. Chem. 2016, 12, 2543–2555, doi:10.3762/bjoc.12.249

• , the improved absorption imparts p-SIDT(FBTThCA8)2 with great potential. Solar cell performance For initial photovoltaic device fabrication, conditions were chosen according to previously reported protocols of structurally similar small molecule systems [38][39][40]. Specifically, p-SIDT(FBTThCA8)2 was

• change in curve shape to gain a better, fundamental understanding of the nature and operation of small-molecule solar cell devices and the role of solvent additives in film formation. As a first insight into the difference in J–V behavior with and without DIO we examined the light intensity dependence of

High performance p-type molecular electron donors for OPV applications via alkylthiophene catenation chromophore extension

• Paul B. Geraghty,
• Calvin Lee,
• Jegadesan Subbiah,
• Wallace W. H. Wong,
• James L. Banal,
• Mohammed A. Jameel,
• Trevor A. Smith and
• David J. Jones

Beilstein J. Org. Chem. 2016, 12, 2298–2314, doi:10.3762/bjoc.12.223

• p-type and n-type conjugated polymers or molecular materials (MM), have attracted significant attention as alternative solar cell technologies as they are light-weight, low-cost and offer the opportunity of cheaper manufacturing employing roll-to-roll printing processes [1][2][3]. Recent advances in

Comparing blends and blocks: Synthesis of partially fluorinated diblock polythiophene copolymers to investigate the thermal stability of optical and morphological properties

• Pierre Boufflet,
• Sebastian Wood,
• Jessica Wade,
• Zhuping Fei,
• Ji-Seon Kim and
• Martin Heeney

Beilstein J. Org. Chem. 2016, 12, 2150–2163, doi:10.3762/bjoc.12.205

• 2AZ, UK 10.3762/bjoc.12.205 Abstract The microstructure of the active blend layer has been shown to be a critically important factor in the performance of organic solar devices. Block copolymers provide a potentially interesting avenue for controlling this active layer microstructure in solar cell

Synthesis and characterization of fluorinated azadipyrromethene complexes as acceptors for organic photovoltaics

• Forrest S. Etheridge,
• Roshan J. Fernando,
• Sandra Pejić,
• Matthias Zeller and
• Geneviève Sauvé

Beilstein J. Org. Chem. 2016, 12, 1925–1938, doi:10.3762/bjoc.12.182

• configuration using P3HT as the electron donor. The best results obtained so far are reported in Table 3. For comparison, we also included results for a typical P3HT:PCBM solar cell. First, we note that best PCEs for Zn(WS3)2 are lower than in our previous publication, 2.36% instead of 4.10% [10]. The main

• evaporator. The devices were characterized using a Oriel Sol2A solar simulator and a Keithley 2400 SourceMeter. The active area of each solar cell is 0.20 cm2. a) Azadipyrromethene ligand labeling positioning; b and c) chelates; d) estimated HOMO/LUMO energy levels [9]. Chemical structures of the fluorinated

Effect of the π-conjugation length on the properties and photovoltaic performance of A–π–D–π–A type oligothiophenes with a 4,8-bis(thienyl)benzo[1,2-b:4,5-b′]dithiophene core

• Ni Yin,
• Lilei Wang,
• Yi Lin,
• Jinduo Yi,
• Lingpeng Yan,
• Junyan Dou,
• Hai-Bo Yang,
• Xin Zhao and
• Chang-Qi Ma

Beilstein J. Org. Chem. 2016, 12, 1788–1797, doi:10.3762/bjoc.12.169

• ; benzodithiophene; π-bridge; chain length effect; organic solar cell; Introduction Solution-processed organic solar cells (OSCs) are considered to be one of the most promising renewable energy technologies because of the advantages of low cost, lightweight, flexibility, and great potentials in large-scale

• , the hole mobility of these compounds in blended films was measured using the space-charge-limited current method (SCLC). The device structure studied here was ITO/PEDOT:PSS/COOP-nHT-TBDT:PC61BM/MoO3/Al, and the thin film deposition method is similar to that for solar cell fabrication. The analysis

• beneficial for increasing JSC in solar cell applications. A high VOC of 0.9–1.0 V was achieved for the COOP-nHT-TBDT:PC61BM cells, owing to the low-lying HOMO levels of these compounds. The lengthening of the conjugated π-bridges improves the performance of the COOP-nHT-TBDT:PC61BM cells, and a maximum PCE

Synthesis and characterization of benzodithiophene and benzotriazole-based polymers for photovoltaic applications

• Desta Gedefaw,
• Marta Tessarolo,
• Margherita Bolognesi,
• Mario Prosa,
• Renee Kroon,
• Wenliu Zhuang,
• Patrik Henriksson,
• Kim Bini,
• Ergang Wang,
• Michele Muccini,
• Mirko Seri and
• Mats R. Andersson

Beilstein J. Org. Chem. 2016, 12, 1629–1637, doi:10.3762/bjoc.12.160

• in good agreement, within a ~10% experimental error, with the experimental values obtained from J–V measurements. In order to further investigate the impact of the side chain architecture of PTzBDT-1 and PTzBDT-2 on the solar cell output parameters, we compare the morphological differences of the

• recorded by a Keithley 236 source-measure unit under AM1.5G simulated solar irradiation, 100 mW/cm2 (Abet Technologies Sun 2000 Solar Simulator). The light intensity was determined by a calibrated silicon solar cell fitted with a KG5 color glass filter to bring spectral mismatch to unity. The active area

• of the solar cell was exactly 6 mm2. During testing, each cell was carefully masked, by calibrated mask, to prevent an excess photocurrent generated from the parasitic device regions outside the overlapped electrodes area. All solar cells were tested, without encapsulation, inside the glove box in

3,6-Carbazole vs 2,7-carbazole: A comparative study of hole-transporting polymeric materials for inorganic–organic hybrid perovskite solar cells

• Wei Li,
• Munechika Otsuka,
• Takehito Kato,
• Yang Wang,
• Takehiko Mori and
• Tsuyoshi Michinobu

Beilstein J. Org. Chem. 2016, 12, 1401–1409, doi:10.3762/bjoc.12.134

• ; hole transport; perovskite solar cell; polycondensation; Introduction Inorganic–organic hybrid perovskite solar cells (PSCs) have recently received significant attention due to their remarkably high power convention efficiencies (PCEs). After the seminal study reported by Miyasaka et al. in 2009 with

Separation and identification of indene–C₇₀ bisadduct isomers

• Bolong Zhang,
• Jegadesan Subbiah,
• David J. Jones and
• Wallace W. H. Wong

Beilstein J. Org. Chem. 2016, 12, 903–911, doi:10.3762/bjoc.12.88

• configuration were deduced using a variety of analytical techniques including 1H and 13C NMR and UV–vis spectroscopy. The electrochemical properties and the organic solar cell device performance were investigated for fractions where a reasonable quantity of sample could be isolated. Keywords: chromatographic

• separation; electron acceptor; fullerene bisadduct; organic solar cell; regioisomers; Introduction Organic solar cells (OSCs) are an emerging renewable energy technology that has achieved remarkable progress over the past two decades. Compared to traditional inorganic semiconductor solar cells, OSCs promise

• derivatives. In recent studies, the solar cell devices achieved power conversion efficiency as high as 7.5% for IC60BA [5] and 7.4% for IC70BA [6]. The IC70BA material used in most reports consisted of a mixture of isomers [7][8][9]. The synthesis of IC70BA involves [2 + 4] Diels–Alder cycloaddition reaction

Polythiophene and oligothiophene systems modified by TTF electroactive units for organic electronics

• Alexander L. Kanibolotsky,
• Neil J. Findlay and
• Peter J. Skabara

Beilstein J. Org. Chem. 2015, 11, 1749–1766, doi:10.3762/bjoc.11.191

• homogeneous blend morphology leading to improved charge carrier transport and increased Jsc. Since the use of o-DCB as the solvent for spincoating provided better performance for BHJSCs than chloroform, it was used for the fabrication of a single material organic solar cell (SMOSC) (Table 3). The SMOSC

Functionalized branched EDOT-terthiophene copolymer films by electropolymerization and post-polymerization “click”-reactions

• Miriam Goll,
• Adrian Ruff,
• Erna Muks,
• Felix Goerigk,
• Beatrice Omiecienski,
• Ines Ruff,
• Rafael C. González-Cano,
• Juan T. Lopez Navarrete,
• M. Carmen Ruiz Delgado and
• Sabine Ludwigs

Beilstein J. Org. Chem. 2015, 11, 335–347, doi:10.3762/bjoc.11.39

• precursor monomers which give access to post-polymerization reactions. Ionic groups on conjugated polymers – so-called conjugated polyelectrolytes [25] – are discussed in the context of solubility tuning [26], sensor applications [27], improvement of solar cell performance by usage as hole injection layers

Photovoltaic-driven organic electrosynthesis and efforts toward more sustainable oxidation reactions

• Bichlien H. Nguyen,
• Robert J. Perkins,
• Jake A. Smith and
• Kevin D. Moeller

Beilstein J. Org. Chem. 2015, 11, 280–287, doi:10.3762/bjoc.11.32

• electrochemical setup. The same electrochemical solar cell developed for the direct oxidation experiments could be utilized to conduct indirect electrolysis. In the second oxidation illustrated, 2,2,6,6-tetramethylpiperidin-1-oxyl (TEMPO) was recycled at the anode [20]. The bulky oxidant was used to selectively